Catalogue

Stainless Steel Skoda Commercial Online Water Chiller, Cooling Capacity: 10 L/Hr, Corporate Office

Product Description

Skoda Single Phase Water Chiller, R-22, Cooling Capacity: 2000ltr

Manual and Automatic valves

Multiport Valves also called a rotary-type backwash valve This valve replaces as many as 6 regular gate valves. Water from the pump can be diverted for various functions by merely turning the valve handle. The water may be sent to waste, used for back washing, bypassing the filter for maximum circulation, for normal filtration, filtering to waste (rinse), or the valve may be closed to not pass water. The pump must be off before changing a valve setting.

Ordinary water filters use a screen to separate particles from water streams. The holes that these Filters have are fairly large. This allows just about everything that is dissolved in the water to pass through as well. An RO drinking water treatment system employs a semi-permeable membrane. The membrane is a thin, multi-layered sheet with pores so small that water molecules can pass through, but it acts as a barrier to dissolved solids like salts and other chemicals. Thus even bacteria and viruses are trapped and not allowed to pass through.

A rotameter is a device that measures the flow rate of liquid or gas in a closed tube. It belongs to a class of meters called variable area meters, which measure flow rate by allowing the cross-sectional area the fluid travels through to vary, causing some measurable effect. The rotameter is popular because it has a linear scale, a relatively long measurement range, and low pressure drop. It is simple to install and maintain.

Pressure gauges measure the pressure of a liquid or gas. Pressure gauges are an essential part of many major industries. One industry in particular is a refinery. These gauges allow workers to monitor how much pressure is flowing through pipelines. There are several ways pressure gauges are used.

Bag filter system is designed for optimum filtration performance. The range provides filtration solution for a broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections.

The internal supports ensures bags will not burst as high differential pressures build up during operation. Operation Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.

FEATURES & BENEFITS:

1. Low down time
2. High flow rates
3. Low pressure drop
4. Custom design services
5. High dirt holding capacity
6. Covers are O-Ring sealed
7. Flow rate up ta, heavy-duty baskets
8. Housings are permanently piped
9. Easy to operate & low maintenance
10. Positive sealing arrangement to avoid bypassing
11. Suitable for PP Collar, Rigid Ring & Snap Band Bags
12. Quick opening Tri Clovers & Fly nut design

13. ASME code stamp available.
14. High temperature & High pressure design are available.
15. All housings made from SS 316 L, SS 316 & SS 304 are mirror polished to resist adhesion of dirt and scale.
16. Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel.
17. Multiple bag filter / Duplex bag filter / jacketed bag filter unit designs are available.
18. Special option include filter bag hold-down devices, sanitary, construction different outlet connections, higher pressure ratings, extra- length legs, heat jacketing and adapters for holding filter bags.

Supplying a complete range of single and multi cartridge housing to use for removal of fine particles present pre filtered medium to a wide range at application in liquid, gas, solvent filtration . The standard rang comprises of metallic housing high quality ss 316l/316/304 carbon steel, rubber lined, frp coated type as well as non – metallic version for corrosive fluids . Filter housing are custom designed for unique application to meet a wide rang of operating parameters with respect to flow temperature , pressure ,material of constriction.

In order to meet specification of pharma industry and to meet latest gmp requirement all our housings meant for sanitary, applications are provided with mirror finish on both , sides and are also electro polished to 240 grit finish. They are suitable to adapt filter element of standard length like 10”,20”,30”,40” , having end connection like doe, code 7, to suit all international designs . These filter cartridge are available in nominal rated like wound / spun bonded or absolute rated like pleated pp cartridges unto 0. 2 micron. The cartridge dia 2. 5”,4” (jumbo) material – pp/ ss.

APPLICATIONS:

1. Water filtration for domestic / industrial
2. RO pre filtration
3. Mineral water/ food industry
4. Beverage pre and final filtration
5. Brewery guard filtration
6. Microelectronics and semiconductor industry pre filter
7. Electroplating industry
8. Pharmaceutical & chemical product filtration

Spun Type :

They are used for normal filteration and do not have a long life.
Available Size: 10”-40” Micron: 1 to 50Micron

Wound Type :

They are used for filtering water with high turbidity as their surface area, and dirt holding capacity is more.
MOC: Polypropylene. Available Size: 10”-40” Micron: 1 to 50Micron

Pleated Type :

These are high efficiency cartridges, which can even stop bacteria and other pathogens, which are present in the water. They have a long life of more than six months. The biggest advantage is that they are washable for any number of times.
MOC: Polypropylene. Available Size: 10”-40” Micron: 1 to 0.2 Micron